FYH UCF202-10E Bearing units

Nlim (grease):12,000 rpm; Ca min:3.48 mm; Brand:NTN; Da max:57 mm; a max:2.08 mm; Mass:0.16 kg; rNa max:0.5 mm; Db min:68.5 mm; f0:14.8; Ca max:3.78 mm;

Inch - Metric:Metric; Inventory:0.0; Fatigue limit load, Cu:0.12 kN; Outside Diameter:1.181 Inch | 30 Mill; Enclosure Type:Contact Seal; Nlim (grease):14,000 rpm; Weight / Kilogram:0; Precision Class:ABEC 1 | ISO P0; Min operating temperature, Tmin:-25 °C; Bore:0.669 Inch | 17 Mill;

d:23.81 mm; H2:41 mm; S:14.3 mm; Designation of open end cover:SCOU205-15; A5:19.7 mm; A:21 mm; s1:17 mm; Designation of closed end cover:SCC205; G:R1/8"; Designation of bearing:UC205-15G2L3;

s1:13.5 mm; B:27 mm; N:8,7mm; T min.:-20 °C; Weight:0.28 kg; A2:19.5 mm; H:95.2 mm; C0:7.88 kN; Recommended tightening torque for set screw:3.7 Nm; J:76 mm;

H3:105; B:49.2 mm; T max.:200 °C; A:38 mm; G:M6x1; J:132 mm; N:16mm; s1:24.6 mm; A4:26 mm; Designation of housing:FC209N-;

e:19 mm; Weight:0.82 kg; Z:42.4 mm; s1:13.5 mm; J:70 mm; C:14 kN; C0:7.88 kN; A2:38.5 mm; Recommended tightening torque for set screw:3.7 Nm; G:R1/8";

T min.:-20 °C; m:5 mm; S:7.5 mm; B1:30.9 mm; B2:13.5 mm; B:21.4 mm; Weight:0.19 kg; SW:3.18 mm; D:52 mm; C1:4.3 mm;

Base to Center Height:Standard; Ball Material:Steel; Expansion Type:Non-Expansion; Brand:Baldor-Dodge; Ball Grade:Class 10; Bearing Duty:Normal Duty; Bearing Series:210 Series; Manufacturing Plant Location:Rogersville, TN; Retainer Type:Std Retainer; Seal Type:Single Lip;

d:38.1 mm; B:49.2 mm; C0:18.2 kN; Designation of bearing:UC208-24G2; T max.:100 °C; Dz:88 mm; e:24 mm; s1:24.6 mm; A1:13 mm; C:29.6 kN;

Flinger Type:Rubberized; d:70.0000 in; Ball Material:Steel; Bearing Series:214 Series; Bearing Outer Ring Material:Steel; Bearing Duty:Normal Duty; Retainer Material:Nylon; Ball Bearing Housing Series:214 Series; Flinger Material:Steel; Max Bearing Speed:5000 rpm;

C0:6.65 kN; Designation of closed end cover:SCC204; H2:62 mm; Weight:0.64 kg; T max.:200 °C; L1:22 mm; T min.:-20 °C; H1:11 mm; s1:15.5 mm; J:52 mm;

C:9.55 kN; H1:10 mm; Designation of bearing:ES201G2; B:19 mm; Z:56.3 mm; N1:19 mm; H2:57 mm; S:6.5 mm; Designation of housing:PE203N-; J:95 mm;

C0:15.2 kN; J:126 mm; Dz:80 mm; L1:49 mm; H1:19 mm; C:25.7 kN; N:14mm; Designation of open end cover:SCOE207-35; S:18.8 mm; s1:36.3 mm;

L:219.5 mm; N:18mm; A:60 mm; H2:128 mm; Z:78.9 mm; Dz:110 mm; Designation of bearing:US211G2; Designation of open end cover:SCO211-55; J:170.5 mm; H1:23.2 mm;

Da max:111 mm; B:31 mm; Nlim:6,900 rpm; Characteristic outer ring frequency, BPF0:7.17 Hz; Number of lubrication holes:3; Max operating temperature, Tmax:200 °C; Characteristic cage frequency, FTF:0.42 Hz; Characteristic inner ring frequency, BPFI:9.83 Hz; d:65 mm; Mass:1.53 kg;