AST 22313MBK Spherical roller bearings

A:30 mm; A2:38.5 mm; Weight:0.77 kg; N:11,5mm; Designation of housing:FE205-; T max.:200 °C; d:25 mm; C0:7.88 kN; S:7.5 mm; s1:13.5 mm;

G:M6x1; T max.:100 °C; A:44 mm; Weight:3.13 kg; s1:28.5 mm; N:25mm; C0:31.8 kN; L:125 mm; B:57 mm; Recommended tightening torque for set screw:16.8 Nm;

d:19.05 mm; A:20 mm; A3:2 mm; C:12.8 kN; B:25 mm; T min.:-40 °C; G:R1/8"; A2:28.5 mm; T max.:100 °C; Designation of housing:FAE204-;

Dz:60 mm; S:17.4 mm; C:14 kN; G:M6x1; Designation of bearing:EX205G2T20; N:12mm; T max.:200 °C; H:125 mm; B:34.8 mm; J:98 mm;

Da max:203 mm; d:120 mm; b:11 mm; da min:132 mm; Brand:SNR; Characteristic inner ring frequency, BPFI:10.38 Hz; Static load, C0:998 kN; rs min:2.1 mm; Radial clearance class:C3; d2:139.9 mm;

T max.:200 °C; G:M6x1; B:30.2 mm; s1:33.4 mm; e:22 mm; Designation of housing:F209-; N:16mm; A:38 mm; T min.:-20 °C; d:44.45 mm;

J:90.5 mm; A1:5 mm; s1:27.8 mm; C:19.5 kN; A:9 mm; C0:11.2 kN; L:84 mm; S:9 mm; Weight:0.53 kg; Recommended tightening torque for set screw:11.5 Nm;

Base to Center Height:Not Applicable; Housing Material:Cast Iron; End Cap Groove:No; Ship Weight:3.1 LB; Bearing Family:Setscrew Ball Bearin; Expansion Type:Non-Expansion; Ball Grade:Class 10; Ball Bearing Housing Series:207 Series; Bearing Series:207 Series; Flinger Material:Steel;

Bearing Outer Ring Material:Steel; Ship Weight:2.27 LB; Bearing Duty:Normal Duty; End Cap Groove:Yes; Ball Bearing Housing Series:209 Series; Bearing Inner Ring Material:Stainless Steel; Flinger Type:INTERNAL RUBBER LIP; d:45.0000 mm; Max Bearing Speed:4000 rpm; Bearing Family:Setscrew Ball Bearin;

b:20 mm; Y1:2.57; Dynamic load, C:3,100 kN; Characteristic outer ring frequency, BPF0:8.18 Hz; Nlim:1,000 rpm; Characteristic rolling element frequency, BSF:6.94 Hz; e:0.26; d:320 mm; Y2:3.83; db min:338 mm;

A5:25.4 mm; SW:3.97 mm; L1:78 mm; Weight:1.67 kg; T min.:-20 °C; N:22mm; N2:37 mm; Designation of bearing:SUC207-23; C0:15.6 kN; L2:13 mm;

B:37.6 mm; B1:51.1 mm; S:18.8 mm; Designation of open end cover:SCOE207-35; SW:4 mm; s1:36.3 mm; A:21 mm; T max.:100 °C; Weight:2.06 kg; Dz:80 mm;

N:13,5mm; Designation of bearing:US210G2; C0:23.2 kN; s1:21.75 mm; S:10.9 mm; T max.:100 °C; Designation of housing:PF210-; A1:8 mm; Weight:1.66 kg; J:127 mm;

D:85 mm; Min operating temperature, Tmin:-20 °C; Da max:81 mm; Static load, C0:11 kN; da min:69 mm; Nlim (grease):7,400 rpm; rs min:0.6 mm; Radial clearance class:CN; ra max:0.6 mm; Fatigue limit load, Cu:0.5 kN;

N:16mm; H3:110; J:138 mm; A2:42.6 mm; Designation of bearing:UC210G2L3; d:50 mm; A4:28 mm; S:19 mm; e:10 mm; Recommended tightening torque for set screw:22 Nm;